Regular maintenance of plumbing system can prevent leakage issues, corrosion, mould infestation, water pooling and structural damage. However, it becomes difficult to encounter hidden corrosion that can eat your pipes and cause serious problems in the long run.
Leaving corrosion unchecked can also put your plumbing and drainage system at risk and pollute the indoor environment during the rain in Melbourne. Thus, it is crucial to pay attention to regular DIY plumbing tips and spot the initial signs of build-up corrosion.
If you are finding it difficult, consider the following signs and identify the corrosion in your plumbing system:
Signs to Consider when Detecting Corrosion in Your Plumbing
Have a look at the following signs:
1. Water Discolouration
Check the colour of your tap water. If it is brownish, rusty, yellowish or greenish, this is a clear sign of corroded plumbing system.
2. Unpleasant Smell
Is there a lingering smell of rotten eggs from your bathtubs, shower area and water taps? This is also an initial signs of corroded pipes. Smell lingers because of built-up bacteria inside the pipes.
3. Water Leakage
If you see leaky taps and pipes in your home, go for the best plumber in Melbourne and fix the corrosion damages.
4. Clanging Noises
Check for the damaged area if you experience loud clanging noises from pipes, drains and sinks.
5. Mineral Deposits
A huge amount of white and greenish mineral deposits around the faucets also indicate corrosion.
Proven Methods to Further Investigate Corroded Pipes
Use these simple yet effective strategies and fix the problem as soon as possible:
1. Water Quality Testing
In this water quality testing method, make sure you check the pH level of your water using litmus strips. A pH below 6 reflects acidic water that can lead to corrosion. Also, hard water with high percentage of minerals can also lead to rusting.
Also check for contaminants, such as sulphur, iron and chlorine.
2. Inspect Visually
Make sure you example all the visible drainage system, pipes, faucet fittings and fixtures to check for corrosion. Note down if you see rust spots, leaks, pitting and mineral deposits.
3. Multimeter Conductivity Testing
You may need a multimeter to check the electrical conductivity of tap water. Higher conductivity means more corrosion irons available in the water. However, this method can be complicated for many people. Plus, you need a specific tool to complete the testing.
How to Fix the Corrosion in a Plumbing System?
You can further try DIY hacks to inspect for your corroded plumbing system or hire highly trained plumbing experts in Melbourne. They follow the proven methods to precisely check for corrosion. They use snake HD pipe inspection cameras and other tools to inspect the pipes from the bottom.
They will also help install an anode rode that provides sacrificial metal to absorb corrosion instead of pipes. Plus, water softeners and filtration systems are used for better functioning of plumbing system in your home.
Wrapping up
There is no rocket science behind inspecting hidden corrosion. With these tips, you can detect them early and fix the issue with the help of a professional plumber in Melbourne, Victoria.
